IoTReady - WiFi network requirements and configuration
By IoTReady Support on August 7, 2024
BeginnerWi-Fi Network Requirements
- Frequency Band:
- Wi-Fi should operate on the 2.4 GHz frequency band.
- The IoT device does not support 5 GHz and will not connect to 5 GHz networks.
- File System for Wi-Fi Configuration Pendrive:
- The pendrive used for Wi-Fi configuration should have the FAT32 or exFAT file system.
- Network Visibility:
- The Wi-Fi network's SSID (network name) should be visible and not hidden.
- Password Protection:
- The Wi-Fi network should be password protected for security purposes.
- A strong and secure password should be used to prevent unauthorized access.
- We support the WPA2 authentication protocol.
- Wi-Fi Channels:
- Wi-Fi channels used should comply with the allowed channels in India for the 2.4 GHz band.
- The following channels are permitted in India: Channel 1 (2.412 GHz), Channel 2 (2.417 GHz), Channel 3 (2.422 GHz), Channel 4 (2.427 GHz), Channel 5 (2.432 GHz), Channel 6 (2.437 GHz), Channel 7 (2.442 GHz), Channel 8 (2.447 GHz), Channel 9 (2.452 GHz), Channel 10 (2.457 GHz), and Channel 11 (2.462 GHz).
User manual for WiFi configuration
Please ensure that the Wi-Fi setup adheres to the above requirements, including the specific Wi-Fi channels allowed in India for the 2.4 GHz band. This will ensure compatibility with the IoT device, maintain security, and comply with local regulations.
Was this article helpful?
More articles on USB Labeling Devices