Wi-Fi Disconnection
- Check the signal strength with a network analyzer app (e.g., WiFiman). The strength should be in the range of -30 dBm to -45 dBm.
- If the device does not reconnect, reboot it by switching it off and on.
- Ensure that the network credentials have not changed.
- If the credentials have changed, scan the new QR code for SSID and Password (SSID and password will be shown on the display).
LED Stuck with a Certain Color
- Yellow: Weight stabilized or awaiting response from the server.
- Blue: Crate not found in the system.
- Green: Audit Passed.
- Red: Audit Failed.
Weight Not Being Displayed
- Check the cable connected to the weighing scale.
- Ensure the cable is not loose.
Continuously Failing
- This may be due to changes on the server. Please contact the Admin team to inquire if any changes were made.
Crate ID/Blue Light Not Visible After Scan
- This occurs because weight data is not coming into the IoT device.
- Check if the weighing scale data is being received by putting the device into Test Mode.
Test Mode
- Scan the QR code:
-> conf:test
